Lathe Machine Tools and Accessories

Approx. 1,500 / Piece Get Latest Price

Description
1. Turnmax offers India's Largest range of live centers to suit specific needs.

2. Each Live Center is provided with an inspection report covering all critical parameters like runout, correctness of Morse Taper shank angle etc.

3. Regular Precision models have 0.015 mm max. runout. Super precision models supplied against specific request have runout 0.008mm. These runout figures are under NO LOAD conditions and not under ACTUAL LOAD conditions. rotate the point in any one direction for 3 to 5 revolution and then take dial indicator reading for runout measurement while rotating the point in the SAME direction.

Approx. 780 / Piece Get Latest Price

Made of alloy steel, heat treated and ground both, internally and externally in single piece construction. 

Chrome Carbon Steel hardened tempered and Ground 60 degree point ground after assembly running in its own bearings.

A revolving center, also known as a live center, is a crucial tool in lathe machining. It's a rotating device mounted in the tailstock of a lathe to support and stabilize the workpiece as it spins. This ensures precise and consistent turning, reducing vibrations and enhancing accuracy during the machining process.

Approx. 3,000 / Piece Get Latest Price

Product Brochure
Description

• Heavier Design compared to Standard Model.
• Regular Precision models have 0.015 mm max. runout. Super precision models supplied against specific request have runout 0.008mm. These runout figures are uncer NO LOAD conditions and not under ACTUAL LOAD conditions. roate the point in any one direction for 3 to 5 revolution and then take dial indicator reading for runout measurement while rotating the point in the SAME direction.

Approx. 300 / Piece Get Latest Price

General purpose Try Square for use on production work. These try squares are ground finished and fitted with accurate steel blades.

A try square is a fundamental hand tool used in woodworking and metalworking for achieving precise right angles and verifying the squareness of corners and edges. It consists of a flat steel or aluminum blade with a wooden or plastic handle attached at a 90-degree angle.
The try square's primary purpose is to ensure that workpieces and joints are perfectly perpendicular, enhancing the accuracy and quality of projects. Craftsmen and carpenters rely on it to mark and check squareness during layout and construction, making it an essential tool for achieving precise and professional results in various woodworking and metalworking applications.

Approx. 250 / Piece Get Latest Price

A wing compass is a versatile drafting and measuring tool used for drawing and measuring circles and arcs in various applications, including architecture, engineering, and design. It consists of two hinged legs with a pivot point at one end and adjustable wing-shaped extensions at the other end. By adjusting the wing extensions to the desired radius or diameter, users can easily create accurate circles and arcs on paper or other surfaces. Wing compasses are valued for their precision and ease of use in technical drawing and drafting tasks.

Approx. 50 / Piece Get Latest Price

Spring joint callipers and dividers are commonly used since these can be comfortably adjusted to any size. Centrally located nut enables opening and closing of the callipers for adjustments.


Spring Callipers:Spring callipers are precision measuring tools used in various applications, including metalworking and woodworking. They consist of two curved legs connected at one end and are equipped with a spring mechanism to keep the legs apart. These tools allow for accurate inside or outside measurements by adjusting the gap between the legs and then transferring that measurement to another workpiece or surface. Spring callipers are commonly used for tasks like checking diameters, depths, or clearances.
Dividers:Dividers are versatile hand tools used for marking and measuring in various trades and crafts. They consist of two pointed legs, which can be adjusted to set a specific distance or radius. Dividers are particularly useful for scribing arcs, circles, and equal divisions on materials such as wood, metal, or paper. They are essential for achieving precision in layout and design work and are often found in metalworking, woodworking, drafting, and other technical disciplines.

Approx. 500 / Piece Get Latest Price

Adjustable hand reamers have blades made of selected high grade steel cutting steel. Reamers are fashioned to adjust to any size, above or below the basic size within the range of individual reamer. The blades slides easily in the accurately tapered slots and can be adjusted by loosening one nut and tightening the other, thus moving the blades in the slot

Approx. 50 / Piece Get Latest Price

• Designed for holding small taps in confined areas where it is not possible to use an Adjustable Tap wrench. The four slotted jaws chuck provides firm grip to the taps and has normal reach.
• Variable Tap Size Holding Capacities- Jaw Opening ranges from 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2"
• The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications.
• Perfect for Holding your Reamers & Taps when you have to a manual reaming or tapping job.

Approx. 75 / Piece Get Latest Price

An arbor for a drill chuck is a vital accessory in the world of drilling and machining. This slender and cylindrical device serves as an intermediary link between a drill chuck and the spindle of a drilling machine or lathe. Its primary purpose is to securely hold drill bits, allowing for quick and efficient tool changes.
The arbor features a tapered end that fits snugly into the machine's spindle, ensuring a precise and secure connection. At the other end, it is equipped with a threaded section or a specialized mechanism designed to accommodate various types and sizes of drill chucks.
Machinists and craftsmen rely on arbors to adapt their drilling machines to different tasks and bit sizes. These unassuming components play a crucial role in facilitating the versatility and functionality of drilling equipment, making them an essential part of any machining setup.

Approx. 100 / Piece Get Latest Price

Generally used for holding taps and in open spaces where there is a room to turn the Tap Wrench. Also used for holding reamers

An adjustable tap handle is a versatile hand tool used in metalworking and machining. Its design allows it to securely hold various sizes of taps and threading tools. Featuring a threaded mechanism and a movable jaw, it can be adjusted to accommodate taps with different diameters.
Machinists and metalworkers rely on adjustable tap handles to provide a stable grip on taps during the threading process. By twisting the handle, the jaws tighten around the tap, ensuring a secure hold while maintaining alignment. This tool's versatility and ease of adjustment make it a valuable asset when threading holes in various workpieces, contributing to precision and efficiency in metalworking tasks.

Approx. 100 / Piece Get Latest Price

Bearing scrapers are essential tools used in the maintenance and repair of machinery and equipment, particularly for removing old or damaged bearings from their housings. They come in various types and may have different features to suit specific applications. Here are the key features and types of bearing scrapers:
**Features**:1. **Blade Material**: The blades of bearing scrapers are made from hardened steel to ensure durability and sharpness.
2. **Ergonomic Handle**: Bearing scrapers come with ergonomic handles that provide a comfortable and secure grip, reducing user fatigue during extended use.
3. **Variety of Blade Shapes**: Bearing scrapers have various blade shapes, including flat, half round, and triangular, to accommodate different bearing housing shapes and sizes.
**Types**:1. **Flat Blade Scraper**: This is the most common type, featuring a flat, rectangular blade for general-purpose bearing removal.
2. **Triangular Scraper**: Triangular scrapers have a triangular-shaped blade, which is excellent for precise work in tight or confined spaces.

Approx. 840 / Piece Get Latest Price

This Surface Gauge is used to find the center of a piece of round section material.

Features:

• Also known as marking block
• Scribes parallel lines
• Heavy base
• Adjustable

The price of this product varies with the length of the spindle.
Adjustable Surface gauge can be used on flat or round surfaces. The accurately machined cast iron base with Vee-Groove in the bottom has an adjustable spindle.

Approx. 500 / Piece Get Latest Price

The accurately machined black finish Boring bar is of extreme rigidity and has no caps to work loose or be mislaid. It will bore close upto a shoulder.

A boring bar is a critical tool in the world of machining and metalworking, designed for precision hole-making and boring operations. It consists of a long, slender, and rigid metal rod with one or more cutting inserts or tips at its end. These cutting tips are strategically positioned to remove material as the boring bar rotates.
Boring bars come in various sizes and configurations to accommodate different workpiece dimensions and machining needs. They are typically used in lathes and milling machines to enlarge, refine, or create highly precise holes and internal features in materials such as metal, wood, or plastic.
Machinists rely on boring bars to achieve tight tolerances and superior surface finishes in their workpieces. These tools exemplify precision and versatility, making them indispensable for tasks that demand meticulous hole machining in the field of manufacturing and machining.

Approx. 200 / Piece Get Latest Price

A round die handle is a cylindrical hand tool designed for securely holding and turning round dies. These handles typically feature a threaded socket that matches the size of the die and provides a firm grip, allowing for precise threading or cutting of external threads on cylindrical workpieces. They are commonly used in metalworking and threading applications to ensure controlled and accurate threading operations.

Approx. 150 / Piece Get Latest Price

Manufactured of fine quality steel. Accurately ground externally and reamed internally. Suitable for workshop use.

Approx. 300 / Piece Get Latest Price

Tool holders are hand forged and beautifully painted

Turning toolholders are essential components in lathe machining, and they come in various types to accommodate different cutting needs. Here are short descriptions for straight, right, and left turning toolholders:
Straight Turning Toolholder:A straight turning toolholder is a common type used in lathe operations. It holds cutting tools with a straight shank and is designed for general-purpose turning, facing, and grooving. It is suitable for machining workpieces with straight profiles.
Right Turning Toolholder:A right turning toolholder is specifically designed for turning operations where the cutting edge needs to engage the workpiece from the right-hand side. It is ideal for creating external threads, chamfers, and other features on the right side of the workpiece.
Left Turning Toolholder:Conversely, a left turning toolholder is designed for turning operations where the cutting edge needs to engage the workpiece from the left-hand side. It is typically used for creating external threads, chamfers, and other features on the left side of the workpiece.
These toolholders play a crucial role in securing cutting tools and ensuring precise and efficient material removal during lathe machining, depending on the orientation and direction of the desired cuts.

Approx. 220 / Piece Get Latest Price

Cutting – Off (Parting) Tool Holders are designed primarily for holding bevel section Tool Bit flats, they can also be used satisfactorily with the Hollow Ground type flat bits. A clamp provides both downwards and side ways pressure along an appreciable area of the tool thus ensuring complete rigidity. Supplied with Allen Bolt and Key but without cutter blade.

Approx. 4,000 / Piece Get Latest Price

Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces. all magnetized at the same time. it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Hardened Vee Blocks are wear and tear resistant and heavy duty blocks. Supplied in a strong and an attractive wooden case.

Also available in Sagar and Samrat.

Approx. 840 / Piece Get Latest Price

This Surface Gauge is used to find the center of a piece of round section material.

Features:

• Also known as marking block
• Scribes parallel lines
• Heavy base

The price of this product varies with the length of the spindle.

A fixed base surface gauge is a precision measuring tool used in machining and metalworking. It consists of a solid, stationary base with a vertical post and an adjustable, fine-pointed indicator. This tool is employed to accurately measure the flatness, surface finish, and alignment of workpieces on a horizontal plane.
Fixed surface gauge are well proportioned and rigid with accurately machined Cast Iron round base having fixed spindle.

 

The fixed base surface gauge's post can be securely anchored to a work surface, while the indicator can be moved up or down the post to reach the desired height. The fine-pointed tip of the indicator can be gently placed on the workpiece's surface, allowing for precise measurements.

Engineers, machinists, and quality control professionals rely on this tool to ensure that surfaces are level, parallel, and meet exacting specifications. It plays a crucial role in achieving high-precision manufacturing, making it an indispensable instrument in the world of metalworking and machining.

Approx. 100 / Piece Get Latest Price

A dead center, often referred to as a "dead centre" or "lathe center," is a critical tool used in machining, specifically in metalworking and woodworking. It's a cylindrical, pointed tool that is inserted into the spindle of a lathe or a similar machine. The dead center serves as a workpiece support and reference point, allowing for the accurate and concentric turning of the workpiece.
The term "dead" in its name indicates that it doesn't rotate during the machining process. This stationary reference point ensures that the workpiece rotates around a fixed axis, enabling precise machining operations, including turning, facing, drilling, and more. Dead centers come in various designs, such as plain, half, and full, each suitable for different types of workpieces and machining tasks. They are essential components in lathe operations, guaranteeing the creation of concentric and accurately machined parts.